You just received your ezeep hub? That is great! You can start here to set up and prepare the ezeep Hub for use, proceed as follows:

1. Plug the micro USB connector of the supplied power unit into the ezeep Hub with the USB icon facing down.
2. Plug the power supply unit into the wall outlet (if necessary, use one of the sup­plied power adapters); the red LED on the front cover lights up
3. LEDs on the front cover of the Hub:
   red = power is on | green = identifies the device 
4. Connecting the hub to the network.
   1. Wired LAN - Connect the network cable on the hub and network outlet.
   2. Wireless LAN - At startup, an access point is available "TPHub-xxx", join it to access the hub console. Then login to the hub console with default password "print4life". Click on "network" tab on the left and connect to the preferred Wifi  
5. You can continue to next article to claim your ezeep Hub. See: Hub Remote Management